Thursday, 27 June 2013

Dislocated rudder bad start for boat move

Tuesday 18th June 2013

After a bit of a wait for diesel at Stourport Basin it was time, at last, to set off down the two staircase pairs and onto the Severn.


In the first staircase disaster struck.

The rudder had got caught on the edge of the cill, lifting it out of its mounting holes.


The skipper recalled that the last time this had happened, about 20 years ago, it had been at this very spot. Oops. A large wooden rudder is unbelievably heavy, as I discovered when trying to lift it, with fellow crew member Richard's help, standing on the tail footbridge using a rope.

When this proved too difficult David fetched the winch. We attached this to the footbridge and lifted and lowered on instructions from David, who was trying to locate the pins in the holes.

In this photo Richard is on the winch while David adjusts the rope.


About an hour after the incident the rudder finally popped into place and we were able to continue our journey.


We were just too late to pass through Lincomb Lock on the Severn so we tied up and ate on board. Rather more excitement than we were expecting on the first day!

I don't know why the photos are too big - and cut off on the right - or is it just me? photo sizes now correct...

2 comments:

Frank Clarijs said...

Pictures: in "older times" (i.e. until some weeks ago) pictures would float under the right hand column in many blogspot blogs. The pictures were visible, but the text in the right hand column would be over the picture.
I guess they "solved" that problem by making the column background non-transparent. Just a thought: can you make the main column wider? Or at least allow it to get wider on bigger screens?

Halfie said...

Frank, the interesting thing is that previously published photos on my blog are displayed correctly. I can see nothing in the html code for the latest photos which is different from that for the earlier ones. I don't think I can control the width of the columns - at least, I don't know how to. I'll see if the problem persists in my next post...